• Drive

    Developed By: OmSaiTech

    Drive is a powerful VTL indicator for VertexFX trading system. The indicator plots two separate lines one in Red color and other is Green color. These both lines are generated using two separate combination of averages using values of High, Low, Open and Close of each candle.

    $0.00
    Developed By: OmSaiTech

    Drive

    $0.00
  • Price Quotes By Email

    Developed By: NeeduVerdeSolution

    Price Quotes By Email is a simple client side script that publishes the account information and the quotes of the selected symbols at the close of every candle. This script is useful when the user needs to monitor the account status remotely.

    $0.00
  • NINA

    Developed By: NeeduVerdeSolution

    NINA is a powerful VertexFX client side VTL indicator that gives excellent entry and exit signals. The concept behind NINA indicator is using Average True Range (ATR) and threshold levels for trading. In the first step we calculate the Average True Range (ATR) over the WATR PERIOD. This value is multiplied by KWATR multiplier. In the next step, the average of this value is calculated again over the WATR PERIOD. Additionally, the maximum and minimum values are calculated over the same period. This value is divided into 3 steps, the minimum value, center value and the highest value.

    $0.00
    Developed By: NeeduVerdeSolution

    NINA

    $0.00
  • Expert 610

    Developed By: NeeduVerdeSolution

    Expert 610 is a client side script robot that trades the breakouts above and below the previous candles. If the difference between the previous High and current price is greater than THRESHOLD and likewise if the difference between the current price and previous Low is greater than the threshold, then it is a candidate for BUY-STOP and SELL-STOP orders. When the above condition is met, it implies that the current candle is engulfed by the previous candle.

    $0.00
    Developed By: NeeduVerdeSolution

    Expert 610

    $0.00
  • AutoMagiCal

    Developed By: NeeduVerdeSolution

    AutoMagiCal is a simple client-side VTL Expert Advisor that generates a unique number to identify the particular chart symbol. When multiple Expert Advisors are running it is necessary to identify the trades generated by each Expert Advisor separately.

    $0.00
    Developed By: NeeduVerdeSolution

    AutoMagiCal

    $0.00
  • JJN Nugget

    Developed By: NeeduVerdeSolution

    JJN Nugget is a powerful VertexFX client side VTL indicator that gives precise entry and exit levels and signals based on Swing trading breakouts. It is based upon 8 moving averages and Swing Highs and Swing Lows. At first step we calculate the Exponential Moving Average (EMA) for 5, 8, 13, 21, 34, 55, 89 and 144 bars. These are Fibonacci periods, each period the fibonacci series from its previous period.

    $0.00
    Developed By: NeeduVerdeSolution

    JJN Nugget

    $0.00
  • Price Channel Stop

    Developed By: NeeduVerdeSolution

    Price Channel Stop is a powerful VertexFX client side VTL indicator that provides a trend breakout trading strategy. It employs the concept of trend breakout to trade in the direction of the dominant trend. At first step, the highest High and the lowest Low of the recent CHANNEL_PERIOD bars is calculated. In the next step, the difference between the highest High and lowest Low is multiplied by RISK. This value is added to the highest High – and is termed the upper breakout level. Likewise, this it is subtracted from the lowest Low and termed as lower breakout level.

    $0.00
  • Support and Resistance

    Developed By: NeeduVerdeSolution

    Support and Resistance is a VertexFX client side VTL indicator that provides crucial support and resistance levels, as well as the Fibonacci levels between those support and resistance levels. It can be used for both sideways (reversal) trading, or for breakout trading. This indicator should be used in confirmation with other indicators. It is recommended to use this indicator on H1, H4 and Daily charts. This indicator may not be suitable on charts of lower time-frames. The indicator is calculated based upon the Highs and Low values. In the first step we calculate the 10 period Simple Moving Average (SMA) of the Close price. The support and resistance values are calculated based upon the price closing above or below the SMA. The Support and Resistance are calculated Lowest Low and the Highest High over the recent 20 bars respectively.

    $0.00
  • T3

    Developed By: NeeduVerdeSolution

    T3 is a powerful VertexFX client side VTL indicator that is helpful in identifying the start and end of trending markets. It is based upon six smoothed moving averages using MA PERIOD 1, MA PERIOD 2, MA PERIOD 3, MA PERIOD 4, MA PERIOD 5, MA PERIOD 6 respectively. The concept behind the indicator is that when the six components move in the same direction, and are aligned directionally above each other, or below each other, by their periods, then the trend is confirmed in that direction.
    In the first step, we calculate the six moving averages based on upon the specified six periods. In the next step, we smooth these six moving averages using the smoothing constant B to generate the six components of the indicator.

    $0.00
    Developed By: NeeduVerdeSolution

    T3

    $0.00
  • T3 ADX Burst

    Developed By: NeeduVerdeSolution

    T3 ADX is a powerful Vertex FX client side VTL indicator based on market cycles that provides excellent entry and exit signals. It is based on the ADX, +DI (PlusDI) and -DI (MinusDI) indicators. This indicator has two components, the GREEN line which is calculated from the +DI (PlusDI) component of the ADX indicator, and the RED line which is calculated from the -DI (MinusDI) component of the ADX indicator.

    $0.00
    Developed By: NeeduVerdeSolution

    T3 ADX Burst

    $0.00
  • FX FISH Mod

    Developed By: NeeduVerdeSolution

    FX FISH Mod is a powerful VertexFX client side VTL indicator that gives excellent entry and exit signals based upon price momentum. It is a bounded oscillator between +1.00 and -1.00 that identifies market tops and bottoms with minimal lag. In the first step, we calculate the Highest High and Lowest Low over the PERIOD bars. We then calculate the ratio of the difference between the current reference price (PRICE_FIELD) and Lowest Low, versus the difference between the Highest High and Lowest Low.

    $0.00
    Developed By: NeeduVerdeSolution

    FX FISH Mod

    $0.00
  • Step RSI

    Developed By: NeeduVerdeSolution

    Step RSI is an innovative Vertex FX client side VTL indicator based upon the combination of Relative Strength Index (RSI) and Simple Moving Average (SMA). It provides signals based upon the RSI crossover, and should be used in combination with other trending indicators.In the first step, we calculate the Relative Strength Index (RSI) based upon the PRICE FIELD and RSI METHOD.

    $0.00
    Developed By: NeeduVerdeSolution

    Step RSI

    $0.00
  • Daily Pivot Point

    Developed By: NeeduVerdeSolution

    Daily Pivot Points is a powerful and handy VertexFX client side VTL indicator that displays the daily Pivot, Support and Resistance levels. This indicator is useful in placing stops and breakout levels for intraday trading. The Pivot value is calculated as the sum of Open (current), High (previous), Low (previous), Close (previous) divided by 4. The Support is calculated as 2 * Pivot – Low (previous). The Resistance is calculated as 2 * Pivot – High (previous). In addition, the indicator displays R1, S1, R2, S2, R3 and S3, as well as intermediate levels between these levels.

    $0.00
  • 3D Oscillator

    Developed By: NeeduVerdeSolution

    3D Oscillator is a powerful VertexFX client side VTL indicator that gives excellent entry and exit signals for market cycles and turning points. It is derived from Relative Strength Index (RSI), Commodity Channel Index (CCI) and the Stochastic indicator. Since it is based on oscillators which identify market turning points, the combination of these oscillators, and smoothing them to eliminate lag enhances the quality of the signals.

    $0.00
    Developed By: NeeduVerdeSolution

    3D Oscillator

    $0.00
  • Day Impulse Overlay

    Developed By: NeeduVerdeSolution

    Day Impulse Overlay is a useful VertexFX client side VTL indicator that attempts to predict the price movement over the next few candles based on the previous candles.

    $0.00
  • Flat Trend

    Developed By: NeeduVerdeSolution

    Flat Trend is a powerful VertexFX client side VTL indicator that gives excellent entry and exit signals. The Flat Trend indicator is based on Parabolic SAR (PSAR) and the Average Directional Movement (ADX), Plus DI (PDI) and Minus DI (MDI) indicators. The concept behind this indicator is that the PDI and MDI indicators determine the primary trend, and the PSAR confirms the trend. In the first step we calculate the Parabolic SAR using a step of 0.02 and a maximum value of 0.20. In the next step we calculate the ADX, PDI and MDI over the PERIOD number of bars. The indicator comprises of four conditions – LIME, LIGHTGREEN, RED and PINK (SALMON).

    $0.00
    Developed By: NeeduVerdeSolution

    Flat Trend

    $0.00
  • Gandalf Pro

    Developed By: NeeduVerdeSolution

    The Gandalf PRO is a client-side Expert Advisor script based on Exponential and Simple Moving average crossovers and smoothing. The Expert Advisor evaluates trades at open of each new candle. If a trade is already opened by the Expert Advisor, no new trades will be placed till the existing trades are closed. In the first step we calculate the Simple Moving Average (SMA) and the Exponential Moving Average (EMA) over the BUY COUNT period to evaluate BUY trades, and over the SELL COUNT period to evaluate SELL trades.

    $0.00
    Developed By: NeeduVerdeSolution

    Gandalf Pro

    $0.00
  • Laguerre RSI

    Developed By: NeeduVerdeSolution

    Laguerre RSI indicator is a powerful Vertex FX client side indicator based on the RSI indicator useful in determining market cycles. It is bounded between 0 and 100 but the period is calculated dynamically based upon the market cycle. To calculate the Laguerre RSI, we first calculate the Relative Strength (RS). In the normal RSI calculations we use closing prices. But in case of Laguerre RSI instead of closing prices, we use values from the Laguerre filter values

    $0.00
    Developed By: NeeduVerdeSolution

    Laguerre RSI

    $0.00
  • T3 TRIX

    Developed By: NeeduVerdeSolution

    T3 Trix is a powerful VertexFX client side VTL indicator that gives excellent entry and exit signals. It is based on the concept of TRIX, which is the Triple Exponential Average, and smoothing the differential between the two averages.

    $0.00
    Developed By: NeeduVerdeSolution

    T3 TRIX

    $0.00
  • VTL Mail Status

    Developed By: NeeduVerdeSolution

    VTL Mail Status is a simple client side script that publishes the account information and the status of the open positions and pending orders to the e-mail recipient. This script is useful when the user needs to monitor the account status remotely. The script uses SMTP e-mail protocol and the CDO framework for composing and sending e-mail messages. The e-mail configuration must be properly configured. Please refer to your e-mail provider reference help on how to find the correct settings of your STMP e-mail provider.

    $0.00
    Developed By: NeeduVerdeSolution

    VTL Mail Status

    $0.00

Main Menu